View EL2244CM_919501.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

I GNS D ES EW S U CT OR N ED F T E PR O D E N D I TU T 0 OM M Data4) REC LE SUBS , ISL550 Sheet OT N IB 002 S 5 P OS (ISL5
(R)
EL2244, EL2444
May 16, 2005 FN7059.2
Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp
The EL2244 and EL2444 are dual and quad versions of the popular EL2044. They are high speed, low power, low cost monolithic operational amplifiers built on Elantec's proprietary complementary bipolar process. The EL2244 and EL2444 are unity-gain stable and feature a 325V/s slew rate and 120MHz gain-bandwidth product while requiring only 5.2mA of supply current per amplifier. The power supply operating range of the EL2244 and EL2444 is from 18V down to as little as 2V. For singlesupply operation, the EL2244 and EL2444 operate from 36V down to as little as 2.5V. The excellent power supply operating range of the EL2244 and EL2444 makes them an obvious choice for applications on a single +5V or +3V supply. The EL2244 and EL2444 also feature an extremely wide output voltage swing of 13.6V with VS = 15V and RL=1k. At 5V, output voltage swing is a wide 3.8V with RL = 500 and 3.2V with RL = 150. Furthermore, for single-supply operation at +5V, output voltage swing is an excellent 0.3V to 3.8V with RL = 500. At a gain of +1, the EL2244 and EL2444 have a -3dB bandwidth of 120MHz with a phase margin of 50. Because of their conventional voltage-feedback topology, the EL2244 and EL2444 allow the use of reactive or non-linear elements in their feedback network. This versatility combined with low cost and 75mA of output-current drive make the EL2244 and EL2444 an ideal choice for price-sensitive applications requiring low power and high speed.
Features
* 120MHz gain-bandwidth product * Unity-gain stable * Low supply current (per amplifier) - 5.2mA at VS = 15V * Wide supply range - 2.5V to 36V * High slew rate - 325V/s * Fast settling - 80ns to 0.1% for a 10V step * Low differential gain - 0.04% at AV = +2, RL = 150 * Low differential phase - 0.15 at AV = +2, RL = 150 * Wide output voltage swing - 13.6V with VS = 15V, RL = 1k * Low cost, enhanced replacement for the AD827 & LT1229/LT1230 * Pb-Free available (RoHS compliant)
Applications
* Video amplifiers * Single-supply amplifiers * Active filters/integrators * High speed signal processing * ADC/DAC buffers * Pulse/RF amplifiers * Pin diode receivers * Log amplifiers
Pinouts
EL2244 (8-PIN SO, PDIP) TOP VIEW EL2444 [14-PIN SO (0.150"), PDIP] TOP VIEW
OUT1 OUT IN1IN1+ V1 2 3 4 8 7 6
+
1 2 3 4 5 6 7
+ + + + -
14 OUT4 13 IN412 IN4+ 11 V10 IN3+
9
V+ IN1OUT2 IN1+
IN2-
+
V+ 5 IN2+ IN2+ IN2OUT2
IN3OUT3
8
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2004, 2005. All Rights Reserved All other trademarks mentioned are the property of their respective owners.
EL2244, EL2444
Ordering Information
PART NUMBER EL2244CM EL2244CM-T13 EL2244CMZ (See Note) EL2244CMZ-T13 (See Note) EL2244CN EL2244CS EL2244CS-T7 EL2244CS-T13 EL2244CSZ (See Note) EL2244CSZ-T7 (See Note) EL2244CSZ-T13 (See Note) EL2444CN EL2444CS EL2444CS-T7 EL2444CS-T13 EL2444CSZ (See Note) EL2444CSZ-T7 (See Note) EL2444CSZ-T13 (See Note) PACKAGE 16-Pin SO (0.300") 16-Pin SO (0.300") 16-Pin SO (0.300") (Pb-free) 16-Pin SO (0.300") (Pb-free) 8-Pin PDIP 8-Pin SO 8-Pin SO 8-Pin SO 8-Pin SO (Pb-free) 8-Pin SO (Pb-free) 8-Pin SO (Pb-free) 14-Pin PDIP 14-Pin SO (0.150") 14-Pin SO (0.150") 14-Pin SO (0.150") 14-Pin SO (0.150") (Pb-free) 14-Pin SO (0.150") (Pb-free) 14-Pin SO (0.150") (Pb-free) TAPE & REEL 13" 13" 7" 13" 7" 13" 7" 13" 7" 13" PKG. DWG. # MDP0027 MDP0027 MDP0027 MDP0027 MDP0031 MDP0027 MDP0027 MDP0027 MDP0027 MDP0027 MDP0027 MDP0031 MDP0027 MDP0027 MDP0027 MDP0027 MDP0027 MDP0027
NOTE: Intersil Pb-free products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2
EL2244, EL2444
Absolute Maximum Ratings (TA = 25C)
Supply Voltage (VS). . . . . . . . . . . . . . . . . . . . . . . . . . . . 18V or 36V Input Voltage (VIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VS Differential Input Voltage (dVIN) . . . . . . . . . . . . . . . . . . . . . . . .10V Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 40mA Power Dissipation (PD) . . . . . . . . . . . . . . . . . . . . . . . . . See Curves Operating Temperature Range (TA) . . . . . . . . . . . . .-40C to +85C Operating Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . +150C Storage Temperature (TST). . . . . . . . . . . . . . . . . . .-65C to +150C
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
DC Electrical Specifications
PARAMETER VOS DESCRIPTION Input Offset Voltage
VS = 15V, RL = 1k, unless otherwise specified. CONDITION VS = 15V TEMP 25C TMIN, TMAX MIN TYP 0.5 MAX 4.0 9.0 10.0 2.8 8.2 11.2 2.8 50 300 500 50 0.3 800 600 1200 1000 65 60 70 70 14.0 4.2 4.2/0.1 13.4 13.1 12.0 3.4 13.4 3.8 3.2 3.6/0.4 3.5/0.5 40 35 75 3.8/0.3 13.6 90 80 1500 UNIT mV mV V/C A A A nA nA nA nA/C V/V V/V V/V V/V dB dB dB dB V V V V V V V V V V mA mA
TCVOS IB
Average Offset Voltage Drift Input Bias Current
(Note 1) VS = 15V
All 25C TMIN, TMAX
VS = 5V IOS Input Offset Current VS = 15V
25C 25C TMIN, TMAX
VS = 5V TCIOS AVOL Average Offset Current Drift Open-Loop Gain (Note 1) VS = 15V, VOUT = 10V, RL = 1k
25C All 25C TMIN, TMAX
VS = 5V, VOUT = 2.5V, RL = 500 VS = 5V, VOUT = 2.5V, RL = 150 PSRR Power Supply Rejection Ratio Common-mode Rejection Ratio Common-mode Input Range VS = 5V to 15V
25C 25C 25C TMIN, TMAX
CMRR
VCM = 12V, VOUT = 0V
25C TMIN, TMAX
CMIR
VS = 15V VS = 5V VS = +5V
25C 25C 25C 25C TMIN, TMAX
VOUT
Output Voltage Swing
VS = 15V, RL = 1k
VS = 15V, RL = 500 VS = 5V, RL = 500 VS = 5V, RL = 150 VS = +5V, RL = 500
25C 25C 25C 25C TMIN, TMAX
ISC
Output Short Circuit Current
25C TMIN, TMAX
3
EL2244, EL2444
DC Electrical Specifications
PARAMETER IS DESCRIPTION Supply Current (per amplifier) VS = 15V, RL = 1k, unless otherwise specified. (Continued) CONDITION VS = 15V, no load TEMP 25C TMIN TMAX VS = 5V, no load RIN Input Resistance Differential Common-mode CIN ROUT PSOR Input Capacitance Output Resistance AV = +1 @10MHz AV = +1 25C 25C 25C 25C 25C 25C 25C 2.0 2.5 5.0 150 15 1.0 50 18.0 36.0 MIN TYP 5.2 MAX 7 7.6 7.6 UNIT mA mA mA mA k M pF m V V
Power-Supply Operating Dual-supply Range Single-supply
NOTE: 1. Measured from TMIN to TMAX.
Closed-Loop AC Electrical Specifications VS = 15V, AV = +1, RL = 1k, unless otherwise specified.
PARAMETER BW DESCRIPTION -3dB Bandwidth (VOUT = 0.4VPP) CONDITION VS = 15V, AV = +1 VS = 15V, AV = -1 VS = 15V, AV = +2 VS = 15V, AV = +5 VS = 15V, AV = +10 VS = 5V, AV = +1 GBWP Gain-Bandwidth Product VS = 15V VS = 5V PM CS SR Phase Margin Channel Separation Slew Rate (Note 1) RL = 1k, CL = 10pF f = 5MHz VS = 15V, RL = 1k VS = 5V, RL = 500 FPBW Full-Power Bandwidth (Note 2) Rise Time, Fall Time Overshoot Propagation Delay Settling to +0.1% (AV = +1) Differential Gain (Note 3) Differential Phase (Note 3) Input Noise Voltage Input Noise Current VS = 15V, 10V step VS = 5V, 5V step dG dP eN iN NTSC/PAL NTSC/PAL 10kHz 10kHz VS = 15V VS = 5V 0.1V step 0.1V step TEMP 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 25C 4.0 250 MIN TYP 120 60 60 12 6 80 60 45 50 85 325 200 5.2 12.7 3.0 20 2.5 80 60 0.04 0.15 15.0 1.50 MAX UNIT MHz MHz MHz MHz MHz MHz MHz MHz dB V/s V/s MHz MHz ns % ns ns ns % nV/Hz pA/Hz
tR, tF OS tPD tS
NOTES: 1. Slew rate is measured on rising edge 2. For VS = 15V, VOUT = 20VPP. For VS = 5V, VOUT = 5VPP. Full-power bandwidth is based on slew rate measurement using: FPBW = SR / (2 * Vpeak). 3. Video performance measured at VS = 15V, AV = +2 with 2 times normal video level across RL = 150. This corresponds to standard video levels across a back-terminated 75 load. For other values of RL, see curves.
4
EL2244, EL2444 Typical Performance Curves
Non-Inverting Frequency Response Inverting Frequency Response Frequency Response for Various Load Resistances
Open-Loop Gain and Phase vs Frequency
Output Voltage Swing vs Frequency
Equivalent Input Noise
CMRR, PSRR and Closed-Loop Output Resistance vs Frequency
2nd and 3rd Harmonic Distortion vs Frequency
Settling Time vs Output Voltage Change
Supply Current vs Supply Voltage
Common-Mode Input Range vs Supply Voltage
Output Voltage Range vs Supply Voltage
5
EL2244, EL2444 Typical Performance Curves
Gain-Bandwidth Product vs Supply Voltage
(Continued)
Open-Loop Gain vs Supply Voltage Slew-Rate vs Supply Voltage
Bias and Offset Current vs Input Common-Mode Voltage
Open-Loop Gain vs Load Resistance
Voltage Swing vs Load Resistance
Offset Voltage vs Temperature
Bias and Offset Current vs Temperature
Supply Current vs Temperature
Gain-Bandwidth Product vs Temperature
Open-Loop Gain, PSRR and CMRR vs Temperature
Slew Rate vs Temperature
Short-Circuit Current vs Temperature
Small-Signal Step Response
Large-Signal Step Response
6
EL2244, EL2444 Typical Performance Curves
Differential Gain and Phase vs DC Input Offset at 3.58MHz
(Continued)
Differential Gain and Phase vs DC Input Offset at 4.43MHz Differential Gain and Phase vs Number of 150 Loads at 3.58MHz
Differential Gain and Phase vs Number of 150 Loads at 4.43MHz
Channel Separation vs Frequency
Overshoot vs Load Capacitance 60 Gain-Bandwidth Product (MHz) 50 Overshoot (%) 40 30 20 10 0 5 10 15 20 25 30 35 40 45 50 Load Capacitance (pF) VS=15V RG=Open
Gain-Bandwidth Product vs Load Capacitance 60 50 40 30 20 10 0 1
VS=15V AV=-2 10 100 Load Capacitance (pF) 1k 10k
Package Power Dissipation vs Ambient Temperature JEDEC JESD51-7 High Effective Thermal Conductivity Test Board 2 1.8 Power Dissipation (W) 1.786W PDIP14 JA=70C/W PDIP8 JA=85C/W
Package Power Dissipation vs Ambient Temperature JEDEC JESD51-3 Low Effective Thermal Conductivity Test Board 1.8 1.6 Power Dissipation (W) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 25 781mW SO8 JA=160C/W 50 SO14 JA=120C/W 1.042W PDIP8 JA=100C/W 1.54W 1.25W PDIP14 JA=81C/W
1.6 1.471W 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 25 1.136W 1.420W
SO14 JA=88C/W
SO8 JA=110C/W
50
75 85 100
125
150
75 85 100
125
150
Ambient Temperature (C)
Ambient Temperature (C)
7
EL2244, EL2444 Simplified Schematic (Per Amplifier)
calculate the maximum junction temperature (TJMAX) for all applications to determine if power supply voltages, load conditions, or package type need to be modified for the EL2244 and EL2444 to remain in the safe operating area. These parameters are related as follows:
T JMAX = T MAX + ( JA x PD MAXTOTAL )
where: PDMAXTOTAL is the sum of the maximum power dissipation of each amplifier in the package (PDMAX). PDMAX for each amplifier can be calculated as follows:
V OUTMAX PD MAX = 2 x V S x I SMAX + ( V S - V OUTMAX ) x --------------------------RL
where:
Burn-In Circuit (Per Amplifier)
TMAX = Maximum ambient temperature JA = Thermal resistance of the package PDMAX = Maximum power dissipation of each amplifier VS = Supply voltage ISMAX = Maximum supply current of each amplifier VOUTMAX = Maximum output voltage swing of the application RL = Load resistance To serve as a guide for the user, we can calculate maximum allowable supply voltages for the example of the video cable-driver below since we know that TJMAX = 150C, TMAX = 85C, ISMAX = 7.6mA per amplifier, and the package JAs are shown in Table 1. If we assume (for this example) that we are driving a back-terminated video cable, then the maximum average value (over duty-cycle) of VOUTMAX is 1.4V, and RL = 150, giving the results seen in Table 1.
TABLE 1. PART DUALS EL2244CN EL2244CS QUADS EL2444CN EL2444CS PDIP14 SO14 81C/W 120C/W 0.802W @85C 0.542W @85C 11.5V 7.5V PDIP8 SO8 100C/W 160C/W 0.650W @85C 0.406W @85C 16.6V 10.5V PACKAGE JA MAX PDISS @TMAX MAX VS
ALL PACKAGES USE THE SAME SCHEMATIC
Applications Information
Product Description
The EL2244 and EL2444 are low-power wideband monolithic operational amplifiers built on Elantec's proprietary high-speed complementary bipolar process. The EL2244 and EL2444 use a classical voltage-feedback topology which allows them to be used in a variety of applications where current-feedback amplifiers are not appropriate because of restrictions placed upon the feedback element used with the amplifier. The conventional topology of the EL2244 and EL2444 allows, for example, a capacitor to be placed in the feedback path, making it an excellent choice for applications such as active filters, sample-and-holds, or integrators. Similarly, because of the ability to use diodes in the feedback network, the EL2244 and EL2444 are an excellent choice for applications such as fast log amplifiers.
Power Dissipation
With the wide power supply range and large output drive capability of the EL2244 and EL2444, it is possible to exceed the 150C maximum junction temperatures under certain load and power-supply conditions. It is therefore important to 8
Single-Supply Operation
The EL2244 and EL2444 have been designed to have a wide input and output voltage range. This design also makes the EL2244 and EL2444 an excellent choice for singlesupply operation. Using a single positive supply, the lower
EL2244, EL2444
input voltage range is within 100mV of ground (RL = 500), and the lower output voltage range is within 300mV of ground. Upper input voltage range reaches 4.2V, and output voltage range reaches 3.8V with a 5V supply and RL = 500. This results in a 3.5V output swing on a single 5V supply. This wide output voltage range also allows single-supply operation with a supply voltage as high as 36V or as low as 2.5V. On a single 2.5V supply, the EL2244 and EL2444 still have 1V of output swing. can vary with different DC offsets, the video performance of the EL2244 and EL2444 has been characterized over the entire DC offset range from -0.714V to +0.714V. For more information, refer to the curves of dG and dP vs DC Input Offset.
Output Drive Capability
The EL2244 and EL2444 have been designed to drive low impedance loads. They can easily drive 6VPP into a 150 load. This high output drive capability makes the EL2244 and EL2444 an ideal choice for RF, IF and video applications. Furthermore, the current drive of the EL2244 and EL2444 remains a minimum of 35mA at low temperatures.
Gain-Bandwidth Product and the -3dB Bandwidth
The EL2244 and EL2444 have a gain-bandwidth product of 120MHz while using only 5.2mA of supply current per amplifier. For gains greater than 4, their closed-loop -3dB bandwidth is approximately equal to the gain-bandwidth product divided by the noise gain of the circuit. For gains less than 4, higher-order poles in the amplifiers' transfer function contribute to even higher closed loop bandwidths. For example, the EL2244 and EL2444 have a -3dB bandwidth of 120MHz at a gain of +1, dropping to 60MHz at a gain of +2. It is important to note that the EL2244 and EL2444 have been designed so that this "extra" bandwidth in low-gain applications does not come at the expense of stability. As seen in the typical performance curves, the EL2244 and EL2444 in a gain of +1 only exhibit 1.0dB of peaking with a 1k load.
Printed-Circuit Layout
The EL2244 and EL2444 are well behaved, and easy to apply in most applications. However, a few simple techniques will help assure rapid, high quality results. As with any high-frequency device, good PCB layout is necessary for optimum performance. Ground-plane construction is highly recommended, as is good power supply bypassing. A 0.1F ceramic capacitor is recommended for bypassing both supplies. Lead lengths should be as short as possible, and bypass capacitors should be as close to the device pins as possible. For good AC performance, parasitic capacitances should be kept to a minimum at both inputs and at the output. Resistor values should be kept under 5k because of the RC time constants associated with the parasitic capacitance. Metal-film and carbon resistors are both acceptable, use of wire-wound resistors is not recommended because of their parasitic inductance. Similarly, capacitors should be low-inductance for best performance.
Video Performance
An industry-standard method of measuring the video distortion of components such as the EL2244 and EL2444 is to measure the amount of differential gain (dG) and differential phase (dP) that they introduce. To make these measurements, a 0.286VPP (40 IRE) signal is applied to the device with 0V DC offset (0 IRE) at either 3.58MHz for NTSC or 4.43MHz for PAL. A second measurement is then made at 0.714V DC offset (100 IRE). Differential gain is a measure of the change in amplitude of the sine wave, and is measured in percent. Differential phase is a measure of the change in phase, and is measured in degrees. For signal transmission and distribution, a back-terminated cable (75 in series at the drive end, and 75 to ground at the receiving end) is preferred since the impedance match at both ends will absorb any reflections. However, when double termination is used, the received signal is halved; therefore a gain of 2 configuration is typically used to compensate for the attenuation. The EL2244 and EL2444 have been designed as an economical solution for applications requiring low video distortion. They have been thoroughly characterized for video performance in the topology described above, and the results have been included as typical dG and dP specifications and as typical performance curves. In a gain of +2, driving 150, with standard video test levels at the input, the EL2244 and EL2444 exhibit dG and dP of only 0.04% and 0.15 at NTSC and PAL. Because dG and dP
The EL2244 and EL2444 Macromodel
This macromodel has been developed to assist the user in simulating the EL2244 and EL2444 with surrounding circuitry. It has been developed for the PSPICE simulator (copywritten by the Microsim Corporation), and may need to be rearranged for other simulators. It approximates DC, AC, and transient response for resistive loads, but does not accurately model capacitive loading. This model is slightly more complicated than the models used for low-frequency op-amps, but it is much more accurate for AC analysis. The model does not simulate these characteristics accurately: * Noise * Settling time * Non-linearities * Temperature effects * Manufacturing variations * CMRR * PSRR
9
EL2244, EL2444 EL2244 and EL244C Macromodel
* Connections: +input * | -input * | | +Vsupply * | | | -Vsupply * | | | | output * | | | | | .subckt M2244 3 2 7 4 6 * * Input stage * ie 7 37 1mA r6 36 37 800 r7 38 37 800 rc1 4 30 850 rc2 4 39 850 q1 30 3 36 qp q2 39 2 38 qpa ediff 33 0 39 30 1.0 rdiff 33 0 1Meg * * Compensation Section * ga 0 34 33 0 1m rh 34 0 2Meg ch 34 0 1.3pF rc 34 40 1K cc 40 0 1pF * * Poles * ep 41 0 40 0 1 rpa 41 42 200 cpa 42 0 1pF rpb 42 43 200 cpb 43 0 1pF * * Output Stage * ios1 7 50 1.0mA ios2 51 4 1.0mA q3 4 43 50 qp q4 7 43 51 qn q5 7 50 52 qn q6 4 51 53 qp ros1 52 6 25 ros2 6 53 25 * * Power Supply Current * ips 7 4 2.7mA * * Models * .model qn npn(is=800E-18 bf=200 tf=0.2nS) .model qpa pnp(is=864E-18 bf=100 tf=0.2nS) .model qp pnp(is=800E-18 bf=125 tf=0.2nS) .ends
10
EL2244, EL2444 EL2244 and EL2444 Macromodel (Continued)
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation's quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com 11

▲Up To Search▲

Price & Availability of EL2244CM

	To Download EL2244CM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .